chemical element
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

print Print
Please select which sections you would like to print:
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Also known as: S, brimstone, sulphur

sulfur (S), nonmetallic chemical element belonging to the oxygen group (Group 16 [VIa] of the periodic table), one of the most reactive of the elements. Pure sulfur is a tasteless, odourless, brittle solid that is pale yellow in colour, a poor conductor of electricity, and insoluble in water. It reacts with all metals except gold and platinum, forming sulfides; it also forms compounds with several nonmetallic elements. Millions of tons of sulfur are produced each year, mostly for the manufacture of sulfuric acid, which is widely used in industry.

In cosmic abundance, sulfur ranks ninth among the elements, accounting for only one atom of every 20,000–30,000. Sulfur occurs in the uncombined state as well as in combination with other elements in rocks and minerals that are widely distributed, although it is classified among the minor constituents of Earth’s crust, in which its proportion is estimated to be between 0.03 and 0.06 percent. On the basis of the finding that certain meteorites contain about 12 percent sulfur, it has been suggested that deeper layers of Earth contain a much larger proportion. Seawater contains about 0.09 percent sulfur in the form of sulfate. In underground deposits of very pure sulfur that are present in domelike geologic structures, the sulfur is believed to have been formed by the action of bacteria upon the mineral anhydrite, in which sulfur is combined with oxygen and calcium. Deposits of sulfur in volcanic regions probably originated from gaseous hydrogen sulfide generated below the surface of Earth and transformed into sulfur by reaction with the oxygen in the air.

Element Properties
atomic number16
atomic weight32.064
melting point
rhombic112.8 °C (235 °F)
monoclinic119 °C (246 °F)
boiling point444.6 °C (832 °F)
density (at 20 °C [68 °F])
rhombic2.07 grams/cm3
monoclinic1.96 grams/cm3
oxidation states−2, +4, +6
electron configuration1s22s22p63s23p4

History

The history of sulfur is part of antiquity. The name itself probably found its way into Latin from the language of the Oscans, an ancient people who inhabited the region including Vesuvius, where sulfur deposits are widespread. Prehistoric humans used sulfur as a pigment for cave painting; one of the first recorded instances of the art of medication is in the use of sulfur as a tonic.

The combustion of sulfur had a role in Egyptian religious ceremonials as early as 4,000 years ago. “Fire and brimstone” references in the Bible are related to sulfur, suggesting that “hell’s fires” are fuelled by sulfur. The beginnings of practical and industrial uses of sulfur are credited to the Egyptians, who used sulfur dioxide for bleaching cotton as early as 1600 bce. Greek mythology includes sulfur chemistry: Homer tells of Odysseus’ use of sulfur dioxide to fumigate a chamber in which he had slain his wife’s suitors. The use of sulfur in explosives and fire displays dates to about 500 bce in China, and flame-producing agents used in warfare (Greek fire) were prepared with sulfur in the Middle Ages. Pliny the Elder in 50 ce reported a number of individual uses of sulfur and ironically was himself killed, in all probability by sulfur fumes, at the time of the great Vesuvius eruption (79 ce). Sulfur was regarded by the alchemists as the principle of combustibility. Antoine Lavoisier recognized it as an element in 1777, although it was considered by some to be a compound of hydrogen and oxygen; its elemental nature was established by the French chemists Joseph Gay-Lussac and Louis Thenard.

Periodic Table of the elements concept image (chemistry)
Britannica Quiz
Facts You Should Know: The Periodic Table Quiz

Natural occurrence and distribution

Many important metal ores are compounds of sulfur, either sulfides or sulfates. Some important examples are galena (lead sulfide, PbS), blende (zinc sulfide, ZnS), pyrite (iron disulfide, FeS2), chalcopyrite (copper iron sulfide, CuFeS2), gypsum (calcium sulfate dihydrate, CaSO4∙2H2O) and barite (barium sulfate, BaSO4). The sulfide ores are valued chiefly for their metal content, although a process developed in the 18th century for making sulfuric acid utilized sulfur dioxide obtained by burning pyrite. Coal, petroleum, and natural gas contain sulfur compounds.

Allotropy

In sulfur, allotropy arises from two sources: (1) the different modes of bonding atoms into a single molecule and (2) packing of polyatomic sulfur molecules into different crystalline and amorphous forms. Some 30 allotropic forms of sulfur have been reported, but some of these probably represent mixtures. Only eight of the 30 seem to be unique; five contain rings of sulfur atoms and the others contain chains.

Get a Britannica Premium subscription and gain access to exclusive content. Subscribe Now

In the rhombohedral allotrope, designated ρ-sulfur, the molecules are composed of rings of six sulfur atoms. This form is prepared by treating sodium thiosulfate with cold, concentrated hydrochloric acid, extracting the residue with toluene, and evaporating the solution to give hexagonal crystals. ρ-sulfur is unstable, eventually reverting to orthorhombic sulfur (α-sulfur).

A second general allotropic class of sulfur is that of the eight-membered ring molecules, three crystalline forms of which have been well characterized. One is the orthorhombic (often improperly called rhombic) form, α-sulfur. It is stable at temperatures below 96 °C (204.8 °F). Another of the crystalline S8 ring allotropes is the monoclinic or β-form, in which two of the axes of the crystal are perpendicular, but the third forms an oblique angle with the first two. There are still some uncertainties concerning its structure; this modification is stable from 96 °C to the melting point, 118.9 °C (246 °F). A second monoclinic cyclooctasulfur allotrope is the γ-form, unstable at all temperatures, quickly transforming to α-sulfur.

An orthorhombic modification, S12 ring molecules, and still another unstable S10 ring allotrope are reported. The latter reverts to polymeric sulfur and S8. At temperatures above 96 °C (204.8 °F), the α-allotrope changes into the β-allotrope. If enough time is allowed for this transition to occur completely, further heating causes melting to occur at 118.9 °C (246 °F); but if the α-form is heated so rapidly that the transformation to β-form does not have time to occur, the α-form melts at 112.8 °C (235 °F).

Just above its melting point, sulfur is a yellow, transparent, mobile liquid. Upon further heating, the viscosity of the liquid decreases gradually to a minimum at about 157 °C (314.6 °F), but then rapidly increases, reaching a maximum value at about 187 °C (368.6 °F); between this temperature and the boiling point of 444.6 °C (832.3 °F), the viscosity decreases. The colour also changes, deepening from yellow through dark red, and, finally, to black at about 250 °C (482 °F). The variations in both colour and viscosity are considered to result from changes in the molecular structure. A decrease in viscosity as temperature increases is typical of liquids, but the increase in the viscosity of sulfur above 157 °C probably is caused by rupturing of the eight-membered rings of sulfur atoms to form reactive S8 units that join together in long chains containing many thousands of atoms. The liquid then assumes the high viscosity characteristic of such structures. At a sufficiently high temperature, all of the cyclic molecules are broken, and the length of the chains reaches a maximum. Beyond that temperature, the chains break down into small fragments. Upon vaporization, cyclic molecules (S8 and S6) are formed again; at about 900 °C (1,652 °F), S2 is the predominant form; finally, monatomic sulfur is formed at temperatures above 1,800 °C (3,272 °F).