electronic music
Our editors will review what you’ve submitted and determine whether to revise the article.
- Related Topics:
- electronic dance music
- trip-hop
- house
- tape music
- grime music
Recent News
electronic music, any music involving electronic processing, such as recording and editing on tape, and whose reproduction involves the use of loudspeakers.
Although any music produced or modified by electrical, electromechanical, or electronic means can be called electronic music, it is more precise to say that for a piece of music to be electronic, its composer must anticipate the electronic processing subsequently applied to his or her musical concept, so that the final product reflects in some way the composer’s interaction with the medium. This is no different from saying that a composer should have in mind an orchestra when composing a symphony and a piano when composing a piano sonata. A conventional piece of popular music does not become electronic music by being played on an electronically amplified guitar, nor does a Bach fugue become electronic music if played on an electronic organ instead of a pipe organ. Some experimental compositions, often containing chance elements and perhaps of indeterminate scoring, permit but do not necessarily demand electronic realization, but this is a specialized situation.
Electronic music is produced from a wide variety of sound resources—from sounds picked up by microphones to those produced by electronic oscillators (generating basic acoustical waveforms such as sine waves, square waves, and sawtooth waves), complex computer installations, and microprocessors—that are recorded on tape and then edited into a permanent form. Generally, except for one type of performed music that has come to be called “live electronic music” (see below), electronic music is played back through loudspeakers either alone or in combination with ordinary musical instruments.
This article covers both early experimentation with electronic sound-producing devices and composers’ subsequent exploitation of electronic equipment as a technique of composition. Throughout the discussion it should be clear that electronic music is not a style but rather a technique yielding diverse results in the hands of different composers.
Historically, electronic music is one aspect of the larger development of 20th-century music strongly characterized by a search for new technical resources and modes of expression. Before 1945 composers sought to liberate themselves from the main Classical-Romantic tradition of tonal thinking and to reconstruct their thinking along new lines, for the most part either Neoclassical or atonal and 12-tone, in which a composition is built up entirely from a tone row consisting of all 12 notes of the ordinary chromatic scale.
This pre-World War II period was accompanied by substantial experimentation with electrical and electronic devices. The most important outcome for the composer was the development of a number of electronic musical instruments (such as the Hammond organ and the theremin) that provided new timbres and that laid the technical foundations for the future development of electronic music proper from about 1948 onward. The rapid development of computer technology has had its effect in music too, so much so that the term computer music is replacing electronic music as the more accurate description of the most significant interaction between the composer and the electronic medium.
Electronic music is represented not only by a wide variety of 20th-century works and not only by serious concert pieces but also by a substantial literature of theatre, film, and television scores and by multimedia works that use all types of audiovisual techniques. Electronic music for theatre and films seems an especially appropriate replacement for a disembodied, nonexistent orchestra heard from a tape or a sound track. Electronic popular music has also won adherents. This mostly has consisted of arrangements of standard popular music for electronic synthesizers, the tentative use of electronic alterations by some of the more ambitious and experimental rock groups, and the preparation of recordings by innovative studio techniques.
History and stylistic development
Beginnings
During the 19th century, attempts were made to produce and record sounds mechanically or electromechanically. For example, the German scientist Hermann von Helmholtz traced waveforms of regular sounds to check results of his acoustical researches. An important event was the invention of the phonograph by Thomas Edison and Emile Berliner, independently, in the 1870s and 1880s. This invention not only marked the beginning of the recording industry but also showed that all the acoustical content of musical sounds could be captured (in principle, if not in actuality at that time) and be faithfully retained for future use.
The first major effort to generate musical sounds electrically was carried out over many years by an American, Thaddeus Cahill, who built a formidable assembly of rotary generators and telephone receivers to convert electrical signals into sound. Cahill called his remarkable invention the telharmonium, which he started to build about 1895 and continued to improve for years thereafter. The instrument failed because it was complex, impractical, and could not produce sounds of any magnitude since amplifiers and loudspeakers had not yet been invented. Nevertheless, Cahill’s concepts were basically sound. He was a visionary who lived ahead of his time, and his instrument was the ancestor of present-day electronic music synthesizers.
The Italian Futurist painter Luigi Russolo was another early exponent of synthesized music. As early as 1913 Russolo proposed that all music be destroyed and that new instruments reflecting current technology be built to perform a music expressive of industrialized society. Russolo subsequently did build a number of mechanically activated intonarumori (noise instruments) that grated, hissed, scratched, rumbled, and shrieked. Russolo’s instruments and most of his music apparently vanished during World War II.
Impact of technological developments
Between World War I and World War II, developments occurred that led more directly to modern electronic music, although most of them were technically, rather than musically, important. First was the development of audio-frequency technology. By the early 1920s basic circuits for sine-, square-, and sawtooth-wave generators had been invented, as had amplifiers, filter circuits, and, most importantly, loudspeakers. (Sine waves are signals consisting of “pure tones”—i.e., without overtones; sawtooth waves comprise fundamental tones and all related overtones; square waves consist only of the odd-numbered partials, or component tones, of the natural harmonic series.) Also, mechanical acoustical recording was replaced by electrical recording in the late 1920s.
Second was the development of electromechanical and electronic musical instruments designed to replace existing musical instruments—specifically, the invention of electronic organs. This was a remarkable achievement and one that absorbed the attention of many ingenious inventors and circuit designers. It should be stressed, however, that it was the objective of these organ builders to simulate and replace pipe organs and harmoniums, not to provide novel instruments that would stimulate the imaginations of avant-garde composers.
Most electromechanical and electronic organs employ subtractive synthesis, as do pipe organs. Signals rich in harmonic partials (such as sawtooth waves) are selected by the performer at the keyboard and combined and shaped acoustically by filter circuits that simulate the formant, or resonant-frequency, spectra—i.e., the acoustical components—of conventional organ stops. The formant depends on the filter circuit and does not relate to the frequency of a tone being produced. A low tone shaped by a given formant (a given stop) is normally rich in harmonics, while a high tone normally is poor in them. Psychologically, one expects this from all musical instruments, not only organs but also orchestral instruments.
Some electronic organs operate on the opposing principle of additive synthesis, whereby individually generated sine waves are added together in varying proportions to yield a complex waveform. The most successful of these is the Hammond organ, patented by Laurens Hammond in 1934. The Hammond organ has odd qualities because the richness of its harmonic content does not diminish as the player goes up the keyboard. The German composer Karlheinz Stockhausen (in Momente, 1961–62), the Norwegian composer Arne Nordheim (in Colorazione, 1968), and a few others have scored specifically for this instrument.
Third was the development of novel electronic musical instruments designed to supply timbres not provided by ordinary musical instruments. During the 1920s there was a burst of interest in building an extraordinary variety of such instruments, ranging from practical to absurd. The most successful of these were relatively few in number, were monophonic (i.e., could play only one melodic line at a time), and survive chiefly because some important music has been scored for them. These are the theremin, invented in 1920 by a Russian scientist, Leon Theremin; the Ondes martenot, first built in 1928 by a French musician and scientist, Maurice Martenot; and the trautonium, designed by a German, Friedrich Trautwein, in 1930.
The theremin is a beat-frequency audio oscillator (sine-wave generator) that has two condensers placed not inside the circuit chassis but, rather, outside, as antennas. Because these antennas respond to the presence of nearby objects, the pitch and amplitude of the output signal of the theremin can be controlled by the manner in which a performer moves his hands in its vicinity. A skilled performer can produce all sorts of effects, including scales, glissandi, and flutters. A number of compositions have been written for this instrument since the 1920s.
The Ondes martenot consists of a touch-sensitive keyboard and a slide-wire glissando generator that are both controlled by the performer’s right hand, as well as some stops controlled by the left hand. These, in turn, activate a sawtooth-wave generator that delivers a signal to one or more output transducers. The instrument has been used extensively by several French composers, including Olivier Messiaen and Pierre Boulez, and by the French-American composer Edgard Varèse.
The trautonium, like the Ondes martenot, uses a sawtooth-wave generator as its signal source and a keyboard of novel design that permits not just ordinary tuning but unusual scales as well. Most of the music composed for this instrument is of German origin, an example being the Concertino for Trautonium and Strings (1931) by Paul Hindemith. In about 1950 a polyphonic version (capable of playing several voices, or parts, simultaneously) of this instrument was built by Oskar Sala, a former student of Trautwein and Hindemith, for preparing sound tracks in a Berlin film studio. These instruments have become virtually obsolete, however, because all the sounds they produce can easily be duplicated by electronic music synthesizers.